High Pair Count Category 5e

Unshielded twisted pair (UTP) category 5e cable for use in backbone cabling systems as described in TIA/EIA 568-B. The cable consists of #24 AWG solid bare copper insulated conductors, assembled into 25 tightly twisted pairs, with a ripcord, under an overall jacket.



1 | 2
The plenum rated cable is for use in air handling ducts and spaces in accordance with Article 800 of the National Electrical Code (NEC). The cable is UL (USA) and cUL (Canada) listed for this application by passing NFPA 262 (UL 910 or FT-6 Steiner Tunnel) test.

 

The non-plenum rated cable is for use as a vertical run in a shaft and for general purpose communications use in accordance with Article 800 of the NEC. The cable is UL (USA) and cUL (Canada) listed for this application by passing the UL 1666 Riser Cable Flammability Test. The cable also passes the CSA FT4 Vertical Flame Test - cables in cable trough from clause 4.11.4 of CSA C22.2 No. 0.3.